pyle lcd w/no input connectors

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95142
Printed Date: August 23, 2025 at 11:28 AM

Topic: pyle lcd w/no input connectors

Posted By: krmass25
Subject: pyle lcd w/no input connectors
Date Posted: June 26, 2007 at 4:03 PM

this is the problem I face...
I am an MECP certified installer looking for a little help wiring up this pyle model plvwr7200 flip down unit. The flip down has been eliminated and I am left with a screen and a wire bundle at the top. I just need to know what the wires are so that I can splice some rca inputs etc to it. I am trying to use this screen for a backup camera monitor for right now. These are the wires I am faced with:

Bare wire (guessing it is ground)

Thicker red

Thinner red

White

Black

Yellow

If I could just figure out what is what I could wire up some connectors and plug in the camera. Thanks for your help and home this isn’t asking too much. Thanks – Kurt Massey < color=#666666>krmass25@verizon.net

[URL]https://i191.photobucket.com/albums/z252/krmass25/DSC00305.jpg[/URL]

[URL]https://i191.photobucket.com/albums/z252/krmass25/DSC00303.jpg[/URL]

Replies:

Posted By: krmass25
Date Posted: June 26, 2007 at 6:56 PM

anyone?

Posted By: i am an idiot
Date Posted: June 26, 2007 at 7:40 PM

Is the thicker red wire a shielded cable?

Posted By: krmass25
Date Posted: June 26, 2007 at 8:09 PM

ok figured this much out.... the two larger wires are the main power and ground. I hooked them up to the battery and the screen came on all white pretty much. it looked like when my sega game gear powers on... :) Anyway I know those are that. that leaves 4 more wires. I am confident that that smaller red and black wires are for the audio input. that leaves white and yellow (which are video colors a lot of the time) and aren't there supposed to be two wires for a video connection? I will know when I get my camera won't I? btw the pictures are at the bottom of the post did anyone see them?>?