pyle roof mount dvd

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95957
Printed Date: May 12, 2025 at 2:00 PM

Topic: pyle roof mount dvd

Posted By: rabracing
Subject: pyle roof mount dvd
Date Posted: July 27, 2007 at 1:41 PM

I have a pyle PLVWR5600 roof mount screen and a pyle PLTVD700 dvd player and am having trouble with the wiring. I have a block connector with a red, black, yellow and blue coming out of it can you tell me what each is for. I havent much experience at fitting one of these so any help will be appreciated

Replies:

Posted By: i am an idiot
Date Posted: July 27, 2007 at 5:28 PM

The yellow wire is to be connected to a constant 12 volt wire. The red wire is to be connected to a wire that gets 12 volts when the ignition switch is turned on. The blue wire is the amplifier turn on wire. The black wire is your ground.

Posted By: rabracing
Date Posted: July 29, 2007 at 1:59 PM

what if I haven`t got an amplifier for the blue wire to connect to ? Does this mean I have to buy one ?

Posted By: i am an idiot
Date Posted: July 29, 2007 at 3:58 PM

Does the unit have speaker wires on it also?? If it does, no you do not need to buy and amp.

The blue wire is amp turn on and possibly power antenna, to raise your power antenna when the radio is on. If you have no amp and no power antenna, you do not neeed this wire. You do need to insulate the end of it if not being used. It has 12 volts on it.

Posted By: rabracing
Date Posted: July 30, 2007 at 2:36 PM

Thanks for the help, "YOU ARE THE MAN" I would have been lost without you

Posted By: i am an idiot
Date Posted: July 30, 2007 at 4:46 PM

Glad to help

Print Page | Close Window