kna dv4100
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96062
Printed Date: May 06, 2024 at 2:21 PM
Topic: kna dv4100
Posted By: julioarambula
Subject: kna dv4100
Date Posted: July 31, 2007 at 1:51 AM
hi i have a kna-dv 4100 i had it in a 98 tacoma and was working nice.i got a 02 gmc pick and installed it in that one and now when i make left or right truns the map will not trun and then i dive for a min and then it move the map to where i am at. i have everything hooked up can it be that i have the system going up and down not side to side?
Replies:
Posted By: i am an idiot
Date Posted: July 31, 2007 at 8:25 PM
I have no idea what you are talking about up and down and not side by side. Does this piece have a dvd based nav unit that is mounted a different way than it was in the other truck? if so there are springs that have to be moved on most units. Are there removable panels on each side of the unit? if so look under them and see if there are springs that can be moved to abother position.
Posted By: julioarambula
Date Posted: July 31, 2007 at 8:55 PM
yeah in the other truck it was right under the radio and now i have it mounted in the back of the truck facing up.
Posted By: i am an idiot
Date Posted: July 31, 2007 at 9:06 PM
i am an idiot wrote:
Are there removable panels on each side of the unit? if so look under them and see if there are springs that can be moved to abother position.
Posted By: julioarambula
Date Posted: August 01, 2007 at 1:35 AM
no there are no removable panels on each side.
Posted By: i am an idiot
Date Posted: August 01, 2007 at 9:29 PM
Would it be possible to mount it like it was in the other truck, just to check and see if it is the problem? Or go to a vacant parking lot and slowly drive in a circle, if it tracks you fine while driving slowly, speed up a little and if it quits working then it could very well be the mounting angle.
Posted By: rjones4876
Date Posted: August 02, 2007 at 12:09 PM
can't be mounted facing up. Needs to be flat for best results
|