jensen vm9312

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96268
Printed Date: May 13, 2025 at 9:49 PM

Topic: jensen vm9312

Posted By: mikeybo2004
Subject: jensen vm9312
Date Posted: August 08, 2007 at 9:05 PM

I know this has been talked about in earlier posts but I could not find an answer. I installed my Jensen DVD player into the dash. Then I found out that I cannot get the video to work. I have a 2002 Dodge Stratus Sedan. Does anyone know where I hook up the pink and green wires up to the parking brake to get my video to work.

I tried grounding out the pink wire and I tried grounding the pink and green wire and still nothing.

Does anyone know where the lead for the parking brake is in my car so I can hook it up the way it is supposed to be.

Thanks mikey

Replies:

Posted By: ceasar326
Date Posted: August 08, 2007 at 10:05 PM

If you dont get video signal, ground the pink wire that comes out with the rca's. The brown is for mute the sound for car cell.

Posted By: toadity55
Date Posted: September 09, 2007 at 7:20 PM

You don't have to hook up the wires at all. You can use a software override. Put the unit in AM/FM mode, then push the setup button on the remote. Quickly enter the code 543210 listening for a beep between each number. This will take you to a hidden setup screen. There is an item labelled brake override - set to on using touchscreen and then exit from screen using X in lower corner. You can now watch video any time without hooking up wires. If you ever update the firmware, you will need to do this procedure again.