05 tacoma avic d3 wiring config
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96351
Printed Date: April 25, 2024 at 9:17 PM
Topic: 05 tacoma avic d3 wiring config
Posted By: edwin8484
Subject: 05 tacoma avic d3 wiring config
Date Posted: August 12, 2007 at 5:45 PM
Hi I just bout a pioneer AVIC-D3 Navigation system for my 05 Tacoma V6 ACC Cab 4x2 Auto, when I installed it I didn't connect the Pink Wired(Car Speed Signal Input) thinking I din't really needed it but after driving the truck for a little i notice the navigation gives me lots of error points, and I think its gotta do with this wire....so my question is , does anyone knows where in my truck is the speed detection circuit or to what wire I could hook this Pink wire from the D3 to my Truck? I will really apreciate any help or lead to solve my problem!...Thanks
Replies:
Posted By: josh1979
Date Posted: August 12, 2007 at 7:10 PM
| 12volts | wht/blue (50A), wht/red (30A) | + | ignition harness | | Ignition | BLACK/ red | + | ignition harness | | Parking Lights+ | green | + | fuse box, 13 pin plug, pin 10 | | Parking Lights- | green | - | headlight switch or BECU, pin 13 | | Notes: The Body ECU is attached to the back of the fuse box. It has a single 26 pin plug. | | Headlight | pink | - | headlight switch or BECU, pin 17 | | Notes: The Body ECU is attached to the back of the fuse box. It has a single 26 pin plug. | | Trunk/Hatch Release | N/A | | | | Power Sliding Door | N/A | | | | Speed Sense | PURPLE / white | | fuse box, black 13 pin plug, pin 5 | | Notes: Also found at the ECM behind the glove box, second plug from the bottom, pin 8. | | Wipers | blue/black (L), blue/red (H) | + | windshield wiper switch | | LF Window up/dn | blue - blue/black | A | driver window switch in door | | RF Window up/dn | blue / YELLOW - black | A | driver kick, 12 pin plug, pins 2, 3 | | LR Window up/dn | GREEN / WHITE - GREEN/ red | A | driver kick, 12 pin plug, pins 7, 1 | | RR Window up/dn | GREEN/ black - green | A | driver kick, 12 pin plug, pins 5, 6 | | Sun Roof open/close | N/A | | | | Sun Roof Limit/close | N/A | | | | Memory Seat 1 | N/A | | | | Memory Seat 2 | N/A | | | | Memory Seat 3 | N/A | | |
|
------------- bring back the rotary phone so i dont have to press 1 to proceed in english
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:20 AM
Ok the digram u gave me is wrong cuz I have already found what i was looking 4 and it works....thanx though!
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:21 AM
here is the link to my problem for anyone else that needs it https://www.toyotanation.com/forum/t138609.html
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:22 AM
here is also some pics 
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:22 AM
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:25 AM
for reverse back-up camera use this wire 
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:26 AM
Posted By: edwin8484
Date Posted: August 13, 2007 at 2:28 AM
visit the web site I provided for better information on where to find the ECU and where to find the reverse back-up light wire.......Enjoy!
Posted By: josh1979
Date Posted: August 14, 2007 at 5:14 PM
edwin8484 wrote:
Ok the digram u gave me is wrong cuz I have already found what i was looking 4 and it works....thanx though!
ok the wiring was not wrong your pic shows the same wire ------------- bring back the rotary phone so i dont have to press 1 to proceed in english
|
