pioneer avic n1
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96493
Printed Date: May 07, 2024 at 9:38 PM
Topic: pioneer avic n1
Posted By: pioneerfan
Subject: pioneer avic n1
Date Posted: August 18, 2007 at 7:24 PM
I have this HU and my settings wont save (like the High Pass and the Sub Woofer settings and the flip open.) idk i have everything hooked up besides the ip bus cable and the xm data cable.. does this make a difference? thanks:) Jake
Replies:
Posted By: pss5075104
Date Posted: August 18, 2007 at 10:31 PM
Do you have 12v on the yellow wire at all times, and 12v on the red with ing, or acc on?
-------------
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Posted By: pioneerfan
Date Posted: August 19, 2007 at 1:30 AM
I have the Red (acc)on the hu connected to the red on the harness... yellow on the hu connected to the harness and the Yellow and Red i binded them together.. because thats the only ay it works...
Posted By: DYohn
Date Posted: August 19, 2007 at 10:09 AM
pioneerfan wrote:
I have the Red (acc)on the hu connected to the red on the harness... yellow on the hu connected to the harness and the Yellow and Red i binded them together.. because thats the only ay it works...
Well, that's not how it is supposed to work. :) What is the power source? The yellow wire needs to have 12 volts constantly or you will lose our memory. Can you turn on the HU with the ignition off? If you have red and yellow connected together and you cannot turn the radio on with the key out of the ignition then you have it connected to the switched power. The yellow goes to constant power (the battery) and the red goes to switched power, AKA the ACC. ------------- Support the12volt.com
Posted By: pioneerfan
Date Posted: August 19, 2007 at 3:49 PM
welll idk why it wont work.. il try it again.. so im not suppost to bind them together ??
Posted By: ferretvw
Date Posted: August 22, 2007 at 8:12 AM
no you're not.
-------------
2008 Scion xB
Pioneer AVIC-D3
RF 3Sixty.2 sound processor
Stock speakers (for now ;))
Posted By: docsautomotive
Date Posted: August 22, 2007 at 11:07 PM
yep  ------------- never stop
Posted By: pioneerfan
Date Posted: August 25, 2007 at 12:39 AM
so how the hell am i suppost to save the settings if the only way it owkrs is if i bind the yellow witht the red??
Posted By: pss5075104
Date Posted: August 25, 2007 at 5:48 AM
there is a fuse most likley under the hood listed as radio, acc, someting like that, that is going to be blown. you can find the fuse and replace. or you can run a new wire to your ing harness. but it sounds like you should take it to your local Best Buy and let them troubleshoot it insted of you messing with it.
-------------
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Posted By: sarcomax
Date Posted: August 25, 2007 at 11:27 AM
the fuse could be labled cabin light, dome light, or something completely different too. I typically just test them all as a favor to my customers.
Posted By: pioneerfan
Date Posted: August 28, 2007 at 8:30 AM
that could cause the settings not to save... cause the radio fuse is fine
|