avic n1 screen burnout
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96609
Printed Date: April 30, 2024 at 9:21 PM
Topic: avic n1 screen burnout
Posted By: wastedtime2525
Subject: avic n1 screen burnout
Date Posted: August 23, 2007 at 1:15 PM
I turned on my avic-n1 today and the screen just stays black. I can press the screen and hte touchscreen stuff stll responds (i remember where some buttons are from my memory) but no matter what i do the screen wont light up. All buttons light up and the outer display works too when the screen is folded down. Also, a couple times when i insert the GPS disk the system powers off and then back on. Is my avic near death?
Replies:
Posted By: wastedtime2525
Date Posted: August 23, 2007 at 1:16 PM
oh sorry for double post, if the screen is burned out, how much will pioneer charge to replace it, cause if its like 400 bucks its not even worth it
Posted By: i am an idiot
Date Posted: August 23, 2007 at 8:14 PM
Posted By: wastedtime2525
Date Posted: August 24, 2007 at 9:46 AM
thanks man, i called the number they are gonna replace the cable for free, hopefully that solves the issue. I thought i was gonna have to replace the screen which is prolly worth more than the entire unit at this point.
Posted By: i am an idiot
Date Posted: August 24, 2007 at 4:07 PM
The symptoms you gave are 100% ribbon cable related. It will fix your problem.
Posted By: edgarmeza
Date Posted: August 28, 2007 at 3:20 PM
Same happened to mine, i sent in for ribbon replacement and they said that the ribbon was in fact broken and they are replaceing it for free but that there was something else wrong with the radio and it is a flat $200 to fix it. I agreed to the charges but im sort of wized off that they wont tell me what I am paying for....so be aware.
|