power wires
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97304
Printed Date: May 10, 2025 at 10:54 PM
Topic: power wires
Posted By: peco
Subject: power wires
Date Posted: September 20, 2007 at 5:24 PM
Im hooking up a Navigation System, Rearview Camera, and a Touch Screen DVD HU to my car where should I run my consistent power wires to? My HU I know can be connected to the factory wiring harness but im not sure where to hook up the Nav. and Camera power wire. And for the ACC (ignition) im just going to tap into the fuse panel. I was thinking of running all my power wires to the HU but that wire is to small to power everything.The camera has a Max. current consumption of 150mA and the Navigation Current Consumption of less the 2.5 A. Also both have fused wires (Camera 2A and Nav. 3A. ) Should I just run a power wire from the battery?
Replies:
Posted By: i am an idiot
Date Posted: September 20, 2007 at 9:38 PM
What kind of a vehicle are we talking about?
|