Print Page | Close Window

flip down tv

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97848
Printed Date: April 26, 2024 at 4:58 AM


Topic: flip down tv

Posted By: dream sound
Subject: flip down tv
Date Posted: October 10, 2007 at 4:20 PM

how do you in stall and wire up a flip down tv need help? please



Replies:

Posted By: ya boy mike
Date Posted: October 11, 2007 at 11:50 PM

Carefully!!! And with extra hands to hold it up.

1. Find mounting location

2. Cut hole in headliner and find beam, mount plate, or wood, whichever works for you, I like plates if possible

3. Run wires, usually just Acc. and Ground, if not stand alone unit then A/V cables too and depending on the unit dome lights too

4. Plug it all up and mount it, best to have hood prop or someone else hold it while you make sure it is straight and while you shoot the screws

5. Check the roof to make sure you didnt use screws that are too long

I usually run my wires through the headliner and run them down the A-pillar and tap into ignition harness, just secure the wires in the pillar so you dont pinch them



-------------
It Hz



Posted By: dream sound
Date Posted: October 18, 2007 at 12:32 PM
thank you ya boy mike


Print Page | Close Window