Print Page | Close Window

panasonic strada in 2007 aspen

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98149
Printed Date: April 27, 2024 at 2:09 PM


Topic: panasonic strada in 2007 aspen

Posted By: jlman
Subject: panasonic strada in 2007 aspen
Date Posted: October 20, 2007 at 10:44 PM

I am going to be installing a Panasonic Strada in a 2007 Chrysler Aspen (not sure yet if it is amplified yet or not prob so bc the guy said it had the alpine speakers). I see that metra has the CHTO-01 harness that will give me everthing i need for the navigation but my question is if not amplified and i have to use a regular harness does anyone have any of the wiring information for this car like vss and all that good stuff? and on the strada can u just ground out the parking brake for video playback while driving or is it equiped with gyro sensors with the pioneers? Also where is the factory amp in these just in case I have to bypass it?

thanks



-------------
just wait till the bass drops



Replies:

Posted By: collyn eastham
Date Posted: November 15, 2007 at 9:16 AM

It will work with the Chrysler CAN harness...even if amped. The Chrysler Can harness from PAC includes the VSS, parking brake wire, reverse wire, acc. power, steering wheel audio control wire, etc...

Just a note: If you plan on using the acc from the can harness to power additional gear you will need to use the wire to trigger a relay since it is only capable of supporting about 2 amps of current draw.



-------------
Collyn Eastham
a.k.a. 300MBQuart
08 HHR Panel




Print Page | Close Window