Print Page | Close Window

2007 jeep cherokee laredo vss

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98787
Printed Date: August 22, 2025 at 8:08 PM


Topic: 2007 jeep cherokee laredo vss

Posted By: live42day
Subject: 2007 jeep cherokee laredo vss
Date Posted: November 08, 2007 at 6:22 PM

Does anyone have the vss (vehicle speed sense) & reverse light wire info for this vehicle? I have searched with no luck. 2007 Jeep Cherokee Laredo.

Thank you in advance.



Replies:

Posted By: extreme1
Date Posted: November 08, 2007 at 9:31 PM
PAC C2R-CHY will give you all the nav outputs you need.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta




Posted By: live42day
Date Posted: November 12, 2007 at 9:02 PM
Thank you for the reply, but for $80.00 I'll pass. I would rather just tap the VSS and the reverse light wight wires.

Anyone know this info?

Thank you in advance!




Posted By: Mike M2
Date Posted: November 13, 2007 at 6:14 AM
I think you may have to reconsider spending the money. Some Chrysler products it is impossible to find a VSS unless you decode it from data, and the Laredo may be the same way.

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: live42day
Date Posted: November 13, 2007 at 2:46 PM
I dint know that. Thank you. Which really sucks cuz I already bought the metra adapter to swap the radio for $70.00.

Is that PAC C2R-CHY the only option to get that wire through data since I already bought the metra one?




Posted By: techman93
Date Posted: November 13, 2007 at 9:23 PM
Speed Sense DK GREEN/ BROWN    (AC) AT PCM, IN BLACK/ GREEN PLUG, PIN 32
Reverse Lights     WHITE/ LT GREEN     (+) AT IPM, CONNECTOR 2, PIN 2

-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya




Posted By: xdrtypopx
Date Posted: December 18, 2007 at 12:18 PM
All my research says that the wire should be in plug 4 (a green plug at the PCM).  However when i go to locate this i see the 4 spots for Plugs (Black, Orange, White, Green) but only the first 3 actually have a harness plugged into them.  The green one in this car is non existent.  Any thoughts... Thanks!




Posted By: silverrage
Date Posted: January 06, 2008 at 1:56 PM
it is still to high of a signal I tried to tap it in the new patriot and the navi showed me goin' about 90mph when I was doin' 20mph the new canbus jeeps have a high and low vss neither can be used for a nav unit u need to get the Pac or peripheral module to get the vss





Print Page | Close Window