Print Page | Close Window

Clueless on how to start on 5.6’ in visor

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9916
Printed Date: August 21, 2025 at 3:28 AM


Topic: Clueless on how to start on 5.6’ in visor

Posted By: CAMAROWITHBASS
Subject: Clueless on how to start on 5.6’ in visor
Date Posted: February 22, 2003 at 7:23 PM

Hello im new to the world of mobile video and im clueless on where to start.

Ok heres the situation car is a 94 chevrolet camaro.  I have a pair of Mobile Tech 5.6'' screens that i want to put into my visors.  I got an estimate for $300.00 which is wayyyy out of my budget.

I have good knowledge of car audio, as i did my own stereo(pioneer deh p9300) and i have 2 pairs of infinity kappa speakers being pushed by a planet audio amp.  So i do have good knowledge of the basics.

How would i go about instlaling these screens into my visors?Do i need some sort of kit?  All they have coming out of them is a pair of  RCA's one red(male) and one black(female).  I assume is is for audio and the other for video?  So where does the power and ground go?

I also know that i need a VCR or a DVD player so i can watch stuff.  I have a ps2 that i might put in, im still unsure though.  Most likely it will be a VCR.

ANY replied will be greatly appreciated.

thanks in advance,

robert




Replies:

Posted By: lmadsen11
Date Posted: February 23, 2003 at 4:41 PM
dude...you have to get it proffesionally installed for it to look right.



Posted By: brianh
Date Posted: February 26, 2003 at 6:44 PM
The visor screens are easy if you just follow the steps. Go to www.partsexpress.com and click on mobile video. then go to the visor monitor section. Go to the bottom of the page and click on the installation pictures icon. Follow these simple instructions and it will turn out fine. Good luck with the install. Brian


Print Page | Close Window