01 silverado 3500 remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136457
Printed Date: April 28, 2024 at 9:03 PM

Topic: 01 silverado 3500 remote start

Posted By: boricua bob
Subject: 01 silverado 3500 remote start
Date Posted: April 15, 2014 at 4:45 PM

im starting a new install alarm/remote start on a 2001 chevey silverado 3500hd. my question is do i need just the 556LW for the passlock II or do i also need a Door Lock Interface. and what else would i need for this install... thanks also which 01 diagram should i use for the install

Replies:

Posted By: boricua bob
Date Posted: April 15, 2014 at 4:47 PM

or is there a Module that does it all...

Posted By: kreg357
Date Posted: April 15, 2014 at 5:38 PM

The 556LW only handles the Passlock2. You will need a 451M door lock module for the (+) locks. The truck is pretty easy.
Here is a link to a Pictorial from a 1500 : https://www.the12volt.com/installbay/forum_posts.asp?tid=135786 Your 3500HD
should be very similar.

-------------
Soldering is fun!

Posted By: boricua bob
Date Posted: April 15, 2014 at 5:56 PM

Can I use the 1701g for both the passlock and door lock

Posted By: kreg357
Date Posted: April 15, 2014 at 6:05 PM

No, the 1701G works on the newer 2007 - 2013 body style trucks.

-------------
Soldering is fun!

Print Page | Close Window