2009 dodge caliper

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137321
Printed Date: May 01, 2024 at 10:16 PM

Topic: 2009 dodge caliper

Posted By: ricardoboston
Subject: 2009 dodge caliper
Date Posted: September 24, 2014 at 6:51 PM

hello techs i need ask if a 2009 dodge caliper its a easy car to do a remote start ,or if theres any info than i should know before i start , thanks

Replies:

Posted By: kreg357
Date Posted: September 24, 2014 at 7:28 PM

Going from memory, it is an easy car to do. I use the iDatalink ADS AL-CA flashed with the ADS AL(DL) CH5 firmware in W2W mode. It is similar connection wise to the Patriot Pictorial : https://www.the12volt.com/installbay/forum_posts.asp?tid=130393

If you want real, real easy, get the ADS HRN CH5 harness. Never used one but that's because I like to solder... posted_image

-------------
Soldering is fun!

Posted By: ricardoboston
Date Posted: September 25, 2014 at 9:04 PM

i think i can do this one ,already checked at idatalink looks all right i just have never done one caliper before thanks kreg357

Posted By: pentavolvo
Date Posted: September 28, 2014 at 7:27 PM

A dball or xk09 flashed for rsr is as easy as they come

Print Page | Close Window