motion warn-away to roll up windows

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75624
Printed Date: May 15, 2024 at 12:18 PM

Topic: motion warn-away to roll up windows

Posted By: 78musicman
Subject: motion warn-away to roll up windows
Date Posted: April 03, 2006 at 12:59 PM

This has ratled my head.I have a motion sensor and was trying to figure out how to wire it to roll up for rain or someone close.And keep the full trigger for interior and siren.I am in the middle of hooking up 2 modules in my crew cab for up/down.I am using 2 crimestopper 5601 it can be set up for pulse or latched.I was going to use the pulse.My autopage 860 has a neg when armed, and neg when disarmed, i am not using.How can i do this to activate the motion sensor when armed while being able to do this.What about the motion sensor trying to repeatly activate the W.R.U over and over will that harm the 5601.

-------------
colorado tap the rockies

Replies:

Posted By: 78musicman
Date Posted: April 03, 2006 at 3:51 PM

Sorry for the other topic when i posted this one it said it did not accept it.And did not post

-------------
colorado tap the rockies

Posted By: ill-logix
Date Posted: April 07, 2006 at 12:04 PM

The signal for the WRU is that a pulse or can it be held on?

Posted By: delSolvortech
Date Posted: April 28, 2006 at 2:45 AM

From my earlier post...

Window roll up using a motion sensor

Posted By: mikes702
Date Posted: May 08, 2006 at 2:30 AM

That is a great idea on the window roll up!! But how would you stop the relay once the window reaches the top? It may keep the window motor powered up until it buns it out of blows a fuse. Hey if you figure it out you could also make on that is coupled to a thermometer to roll the windows down once it hits a certain temp?