Rollup Windows using a motion sensor

Home / the12volt's Install Bay / Car Security and Convenience / Rollup Windows using a motion sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

delSolvortech

Member - Posts: 2

Joined: July 07, 2005

Location: United States

Posted: July 07, 2005 at 8:44 PM / IP Logged

Sorry if this is a repost....

Rollup windows when sector violated

Unfortunatly the diagram link doesn't work....

Roll up on alarm

I am interested in using my DEI 520T motion sensor to roll up my windows when someone gets close to the car. My alarm is a DEI 791XV and I am using a DEI 530T. Any help is greatly appreciated.

Along with that I still would like to use the "roll up when armed " feature.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 08, 2005 at 3:58 AM / IP Logged

you might need a relay it can be done i'm sure the motion sensors are neg triggers. but the window module might need a couple of hundred mA to activate.

here is how you would do it.

86 - 12V

85 - exterior trigger

30 - solid chassis ground

87 to window activation.

this should do the job.

you can try the exterior trigger to the window activation direct. i'm not sure weather it will work or not

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 08, 2005 at 4:05 AM / IP Logged

i was just reading the post there where the guy broke the connection on the ground when armed output. to activate the window module.

for that you could

30 - ground when armed to window mod

87a - ground when armed to alarm

85 - (-) exterior xone trigger

86 - 12V

this should do the same i thought without the need for resistors and capacitors. or maybe the connection needs to be severed for longer i'm not sure. probably depends on the window module

alpine0000

Copper - Posts: 160

Joined: July 06, 2005

Location: Virginia, United States

Posted: July 08, 2005 at 6:14 AM / IP Logged

delSolvortech wrote:

Sorry if this is a repost....

Rollup windows when sector violated

Unfortunatly the diagram link doesn't work....

Roll up on alarm

I am interested in using my DEI 520T motion sensor to roll up my windows when someone gets close to the car. My alarm is a DEI 791XV and I am using a DEI 530T. Any help is greatly appreciated.

Along with that I still would like to use the "roll up when armed " feature.

haha, thats an awesome idea. i didnt think about that one!

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: July 08, 2005 at 6:34 AM / IP Logged

me neither

no end to the possibilities LOL

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rollup Windows using a motion sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.