Wiring for 1 channel?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87974
Printed Date: May 12, 2025 at 4:52 PM

Topic: Wiring for 1 channel?

Posted By: jneal4k
Subject: Wiring for 1 channel?
Date Posted: December 29, 2006 at 2:45 AM

My predicament is simple, I'm sure.....but being a newbie to the install side I figure

I better ask. My Orion Component Crossovers' are different than the others I've seen, they are

biampable....they have (2) prs. of Inputs and (2) prs. of outputs

I am only going to run(1) channel to each crossover.How do I wire it with only (1) channel input.

I have (2) sets of components (6.5) one CDT Audio, & one Orion set, being powered by a Xtant 4 channel amp.

Thank You for any/all help.

Replies:

Posted By: geepherder
Date Posted: December 29, 2006 at 6:41 AM

You do exactly what Haemphyst told you in your other post. This should be explained in the manual.

-------------
My ex once told me I have a perfect face for radio.

Posted By: haemphyst
Date Posted: December 29, 2006 at 8:20 AM

I guess I just like to hear myself type.

(That, by the way, is a link to your previous thread...)

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Print Page | Close Window