directfax 1081
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101801
Printed Date: May 21, 2024 at 1:41 AM
Topic: directfax 1081
Posted By: Mike M2
Subject: directfax 1081
Date Posted: February 02, 2008 at 1:19 PM
Hey guys i need a little help. Can someone post a copy of 1081 for me? Than ks....
-------------
Mike M2
Tech Manager
CS Dealer Services
Replies:
Posted By: mikvot
Date Posted: February 02, 2008 at 2:37 PM
Posted By: Mike M2
Date Posted: February 02, 2008 at 3:54 PM
Thanks! Unfortunately it doesn't solve my problem tho. I need to disarm the factory alarm and not unlock all the doors for two stage unlock. I can deal with the unlock and locking during RS i guess. I'm thinking of removing the factory unlock relays and make a harness that will plug spade terminals into the factory socket. I can then have the unlock relays outside the relay panel, allowing me to interupt them during factory disarm and solving my problem. Think it will work? The only other thing i can think of is tracing the motor legs when they leave the panel and interupt them there with separate relays...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: Mike M2
Date Posted: February 02, 2008 at 5:45 PM
This is why i like Avox, they have an actual pulse before start. My DEI doesn't and that's going to add another relay to this. I'm going to interrupt both unlock motor legs(drivers door and all other doors) with relays and drive them with the factory disarm wire on my AM7. This should allow the factory alarm to disarm(thru the WHITE/ green and a 665 resistor). The problem is that wire also pulses if you disarm the DEI(stupid idea from DEI) so i'll have to use a 3rd relay to interrupt the factory disarm wire on the AM7when i hit disarm. Gonna try in the morning, as long as the unlock pulse and the factory disarm pulse are the same length of time it should work....
-------------
Mike M2
Tech Manager
CS Dealer Services
|