2008 express van, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102550
Printed Date: April 30, 2024 at 10:45 AM
Topic: 2008 express van, remote start
Posted By: start25
Subject: 2008 express van, remote start
Date Posted: February 25, 2008 at 4:25 PM
I'm trying to install a remote start on this thing, does anybody have diferent wiring info then I have.... When I look on ingnition harness there is 2 pink wires 1- white, 1brown, 1- RED / white, and when I test them pink and white show 4volts, the rest of them show 12 when ign .is in on position... Maybe the wires are at BCM. Have anybody done the 2008 model before...?
Replies:
Posted By: start25
Date Posted: February 25, 2008 at 5:53 PM
I found acc wire its brown and one of pink wires is ignition. I cant find starter wire, please help, have anybody done R/S on this 2008 model?
Posted By: sparkie
Date Posted: February 25, 2008 at 7:51 PM
These vans are like the new designed full size trucks. You need a module to integrate the starter circuit and the transponder circuit. I use the XK06-PKG9 from Trilogix. It will take care of most of the wiring you need.
-------------
sparky
Posted By: start25
Date Posted: February 25, 2008 at 8:12 PM
is there 2 ignition wires? which are they?
Posted By: mikvot
Date Posted: February 25, 2008 at 8:54 PM
This might help you.11D_1609.pdf -------------
Posted By: sparkie
Date Posted: February 25, 2008 at 8:56 PM
There is only one ignition wire but there are 2 pink wires. Only one is the ignition and the other is for the Passlock system. Get your hands on a module that will interface with GM's hybrid Passlock II/transponder system. Without a module, the truck won't start.
-------------
sparky
Posted By: jim hunter
Date Posted: February 26, 2008 at 8:10 PM
just like all new gms, starter wire is not needed, just ign, accessory, power,ground,brakepedal shutdown,park lites,and a coded key in a universal bypass(dei 556u, or audoivox astcbm) truck will start when ign and accessory come on, accessory drops (while ignition stays)bcm then tells vehicle to crank
have not done a new van but have done a ton of new trucks and cobalts and this way worls great(rumor is that this will store hidden codes but it will throw no lights and i scanned one a week after i installeditthis way and no codesfound so maybe it will store hidden codes after a while but i work at a gm store and have had no issues)
Posted By: hydroz_23
Date Posted: February 26, 2008 at 9:54 PM
just use a xk06 and a xk01 very easy install.
Posted By: brent88
Date Posted: February 27, 2008 at 12:02 AM
well i did the whole now start wire thing on a 2007 trail blazer on accident. the vin said that it was an 06, but the wiring was 07 so i didnt have the starter wire hooked up. remote start worked perfect, but it threw two transmission codes.
Posted By: start25
Date Posted: February 27, 2008 at 12:35 AM
The brake wire is @ BCM brown connector white wire.
Posted By: hydroz_23
Date Posted: February 27, 2008 at 8:15 AM
brent88 wrote:
well i did the whole now start wire thing on a 2007 trail blazer on accident. the vin said that it was an 06, but the wiring was 07 so i didnt have the starter wire hooked up. remote start worked perfect, but it threw two transmission codes.
06 and 07 trilblazers are the same. they did not change until 08
|