Print Page | Close Window

tach wire on a 98 grand am

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105156
Printed Date: May 15, 2024 at 1:56 PM


Topic: tach wire on a 98 grand am

Posted By: rt4x4
Subject: tach wire on a 98 grand am
Date Posted: May 31, 2008 at 5:24 PM

I think i read somewhere that you can use the camshaft sensor wire (brow/white) for the tach sense wire, is this ok or is there something better?



Replies:

Posted By: i am an idiot
Date Posted: May 31, 2008 at 8:18 PM
https://www.the12volt.com/installbay/alarmdetail/1850.html



Posted By: rt4x4
Date Posted: May 31, 2008 at 9:33 PM
Yes,  but can you use the camshaft position sensor(BROWN / white) because i am having a problem finding the correct white wire on the 4 cyl ,also i want to know what color the bulb check wire is



Posted By: gus1
Date Posted: May 31, 2008 at 11:19 PM
Bulb check is the thin black in with the two red high current at the key.

As far as the tach wire, on the 4 cyl you can get at an injector (not pink wire) on the driver's end of the motor, or, yes, you can use the cam position sensor.

The white wire is also found in harness at passenger's end of firewall where is passes through to the ECU.   Easiest is the injector.

-------------
Wherever I go, that is where I end up......


Print Page | Close Window