
1998 Pontiac Grand Am Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Pontiac Grand Am Alarm Information )
1998 Pontiac Grand Am Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red (2) |
Ignition Switch Harness |
Starter |
Yellow |
Ignition Switch Harness or Top Harness going through Firewall |
Ignition |
Pink |
Ignition Switch Harness |
Ignition 2 |
White |
Must Use for Remote Start |
Ignition 3 |
Green |
Ignition Switch Harness |
Accessory |
Orange |
Ignition Switch Harness (Heat/AC) |
Tach |
White |
Coil |
Neutral Safety Wire |
Orange/Black (-) |
Behind Driver's Dash left of Column |
Brake Switch |
Blue |
Brake Switch |
Trunk Release |
Black (+) |
Keyless Module in Trunk |
Trunk Pin |
Black/White (-) |
Driver's Kick Panel |
Parking Lights |
Brown (+) |
Light Switch or Driver's Kick Panel |
Head Lamp |
Yellow (+) |
Steering Column |
Door Trigger |
Green/Black (-) L |
BCM Pin A2 Pink Connector under Passenger's Seat |
Door Lock |
Light Blue (+) |
BCM Pin A8 Pink Connector Positive Trigger |
Door Unlock |
White (+) |
BCM Pin B3 Pink Connector |
Horn Wire |
Black (-) |
Steering Column |
Windows Up |
LF=Blue, RF=Dark Green, LR=Dark Green, RR=Purple |
Windows Down |
LF=Gray, RF=Tan, LR=Purple/White, RR=Light Green |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.