Print Page | Close Window

viper 560xv in 2000 toyota tundra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107966
Printed Date: May 16, 2024 at 8:08 AM


Topic: viper 560xv in 2000 toyota tundra

Posted By: morlan52
Subject: viper 560xv in 2000 toyota tundra
Date Posted: October 06, 2008 at 7:21 PM

Hey guys, I just ordered a Viper 560xv remote start/security system and I'm planning on installing it myself in my 2000 Toyota Tundra DC SR5. I have made a plan for all the wiring connections but I need someone who has installed it before to double check and make sure I'm doing this right.

Here's the system's installation instructions and the wiring chart:

https://www.the12volt.com/installbay/file.asp?ID=454
https://www.the12volt.com/installbay/alarmdetail/2150.html

BTW - the question marks next to wires means I don't know where I'm supposed to connect them, so any help would be appreciated posted_image


560XV Install into 2000 Toyota Tundra

12-Pin connector

RED / White - Don't Use
Red - Connect to White or WHITE/ Red wire from ignition.
Brown - Connect to Red wire from siren.
Black - Ground to chassis.
Violet - Connect to WHITE/ Blue wire in kick panel (driver door harness)
Blue - Don't Use
Green - Don't Use
BLACK/ White - Don't Use
? WHITE/ Blue - I'm not sure what this wire goes to :S
White - Connect to Green wire from dash dimmer switch.
Orange - Don't Use

Secondary Harness

? Light Blue - Do you connect this to the unlock for driver door or to the wire that unlocks both doors? :S
WHITE/ Black - Don't use
Violet/Black - Don't use
GREEN / WHITE - Don't use
Gray/Black - Don't use
Light GREEN/ Black - Don't use

Relay Satellite

Purple - Connect to GREEN/ Black wire from ignition on side going to starter.
Green - Connect to GREEN/ Black wire from ignition on side not going to starter.
Red - Connect to White or WHITE/ Red wire from ignition.
Orange - Connect to Blue/Red wire from ignition.
Pink - Connect to BLACK/ Red wire from ignition.
Pink/White - Connect to BLACK / YELLOW wire from ignition.
RED / White - Don't Use

Remote Start Harness

? BLACK/ White - Not sure...Can I just ground this wire to chassis?
? Violet/White - What's the easiest tach wire to tap into?
Brown - Connect to GREEN / WHITE wire from brake switch.
Gray - Connect to hood pinswitch.
? Blue/White - I don't need to use this do I? :S

Horn Harness

ORANGE / Black - Don't Use
Brown - Connect to GREEN/ Red wire in steering column.

If you guys see any errors let me know...

Thanks posted_image

- morlan52



Replies:

Posted By: morlan52
Date Posted: October 06, 2008 at 7:27 PM
Oops forgot to include the door lock harness posted_image

Door Lock Harness

Light Blue - Connect to RED / Yellow and Blue/Black wires in kick panel, diode isolated
Green - Connect to WHITE/ Green Wire in kick panel




Posted By: morlan52
Date Posted: October 08, 2008 at 12:16 PM
anyone? posted_image





Print Page | Close Window