2000 Toyota Tundra Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Toyota Vehicles / 2000 Toyota Tundra

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• View all Toyota Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Toyota Tundra Alarm Information )

2000 Toyota Tundra Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White or White/Red	Ignition Switch Harness
Starter	Green/Black	Ignition Switch Harness
Ignition	Black/Red	Ignition Switch Harness
Ignition 2	Black/Yellow	Ignition Switch Harness
Accessory	Blue/Red	Ignition Switch Harness
Tach	Blue/Yellow	Any Coil, Use 1 Cylinder Setting
Brake Switch	Green/White	Brake Switch
Trunk Pin	n/a
Parking Lights	Green (+)	Driver's Kick Panel
Head Lamp	Green/Yellow (-)	Light Switch
Factory Disarm	n/a
Door Trigger	White/Blue	Driver's Door Harness
Door Lock	White/Green (-)	Driver's Door Harness Negative Trigger
Door Unlock	Red/Yellow (-)	And Blue/Black use Both Wires Diode Isolate
Driver's Lock	Blue/White (+)	Driver's Kick
Driver's Unlock	Black/Yellow	Driver's Kick
Horn Wire	Green/Red (-)	Steering Column
Windows Up	Light Green DR.Side Red/Black Passenger's Side
Windows Down	Blue/Yellow, Red/Green

• Cruise Control Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.