can sl2 tach source

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124291
Printed Date: May 09, 2024 at 5:00 AM

Topic: can sl2 tach source

Posted By: prdjr165
Subject: can sl2 tach source
Date Posted: November 05, 2010 at 11:43 AM

I was wondering if the tach source on this module is reliable or shouild i just connect to the tach source in the vehicle?2010 jetta and scytek r/s.

Replies:

Posted By: kreg357
Date Posted: November 05, 2010 at 5:46 PM

Here is a post from 2008. https://www.the12volt.com/installbay/forum_posts.asp?tid=107177 In it, there is a refference to the Fortin CAN SL2 Tach output from a highly respected forum member. I use iDatalink ( with no Tach issues ) and have not tried the CAN SL2 myself.

-------------
Soldering is fun!

Posted By: prdjr165
Date Posted: November 05, 2010 at 6:22 PM

that's what i figured.the car was starting fine then all of the sudden it's losing the tach signal,getting the car back tomorrow so i will re-connect the tach sense wire to the tach wire in the car.Thanks!

Print Page | Close Window