2004 Silverado, alarm wiring, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140993
Printed Date: October 31, 2025 at 7:19 AM
Topic: 2004 Silverado, alarm wiring, remote start
Posted By: bvigor
Subject: 2004 Silverado, alarm wiring, remote start
Date Posted: March 10, 2016 at 11:39 AM
Any schematics out there for bypassing a factory alarm and wiring all 4 door to work off A Viper alaram/rs ? Using and old Fortina GM-SL self learning data interface?
Replies:
Posted By: triniforever
Date Posted: March 10, 2016 at 1:33 PM
I believe kreg is your guy for the answer to your question !
-------------
triniforever
Posted By: bvigor
Date Posted: March 10, 2016 at 8:10 PM
I've seen a lot of his posts he definitely knows what he's doing I was hoping he would see my post and reply. Im at the point now that I think I have a defective part. I have the power wires and ground connected and the control center light will not come on.
Posted By: triniforever
Date Posted: March 10, 2016 at 8:58 PM
Why dont you start by listing all the connections you made from the viper unit and bypass module to the vehicle ?
-------------
triniforever
Posted By: rs specialist
Date Posted: March 11, 2016 at 9:49 AM
Why not use a EVO-ALL or INT-SL? these will control door locks as well as transponder.
Posted By: bvigor
Date Posted: March 11, 2016 at 3:18 PM
Well it looks like one of the problems is that the interface I have will not work with a Viper system, according to Best Buy. So what EVO-ALL or INT-SL systems would you suggest? The place I bought the system from said they will take it back.
Posted By: bvigor
Date Posted: March 11, 2016 at 3:31 PM
I would have rather just had one professionally installed but I live 1.5 hrs away from the closest place that can do that. I'm going to send the Viper back. I have a Fortina interface but I guess that only works with Compustar systems. What suggestions do you guys have for a remote start/alarm that will either work with my interface or even better will work without an interface all together? I've done RS in the past but they were always on work trucks that had few electronics. I dont have the factory FOBs so I need a system that has its own fobs, the Carion System thats in it now has it own fibs and thats all I have.
Posted By: smokeman1
Date Posted: March 11, 2016 at 5:50 PM
What Fortin bypass do you have? I've used them with Viper systems.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: bvigor
Date Posted: March 11, 2016 at 7:26 PM
It is the GM/SL self learning
Posted By: bvigor
Date Posted: March 11, 2016 at 7:50 PM
Just looking for suggestions on a Remote Start/keyless entry possibly security too system. I have a data interface its an older one that in the truck already with a Clarion remote start. I dont have the factory FOBs so I cant't use an add-on style. I live 1. hrs away from the nearest installation center so this will be a DIY. Im no expert but I do gave some experience. Is there a plug and play or a system? I prefer to stay away from Viper, they will not help anyone thats not an authorized dealer.
Posted By: bvigor
Date Posted: March 11, 2016 at 8:28 PM
I've decided to remove the Viper and re-install the Clarion for now until I can find a different brand of RS that I can get tech support from the manufacturer. Thank for all the replies!!
Posted By: bvigor
Date Posted: March 11, 2016 at 8:31 PM
Here is the link to the first Post I made, it has more info about what wiring I did have done.
https://www.the12volt.com/installbay/forum_posts.asp?tid=140983
|