Viper 4105v Remote Start 05 Yukon
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144270
Printed Date: May 05, 2024 at 11:54 AM
Topic: Viper 4105v Remote Start 05 Yukon
Posted By: steveprotek
Subject: Viper 4105v Remote Start 05 Yukon
Date Posted: March 27, 2018 at 10:51 PM
Hello....trying to install this R/S on my 05 Yukon, and am at a standstill. Saw another thread on this site regarding this same problem, but could not post on it. It doesn't start and won't lock/unlock from the Viper remote.
I have hooked up the wiring as follows:
9 pin main harness:
Light Green Black Factory Alarm Disarm: (-)Light Green
Green/White Factory Alarm Rearm: not used
Yellow Ignition out to alarm: not used
White/Blue Activation Input: not used
Orange Ground When Locked/Anti Grind: not used
Brown Horn Output: (-)Black
Red/White Trunk Release: not used
Black: Ground
White (+/-) Light Flash Output: (-)Brown
I believe the problem with it not starting or lock/unlocking is related to the Activation Input blue & white wire, but need an experienced set of eyes to see what I'm missing. Wasted most of tonight scouring the internet for help, but no luck.
Thanks for any input the forum can give.
Steve
-------------
Steve
Replies:
Posted By: steveprotek
Date Posted: March 27, 2018 at 10:52 PM
Additional Info, this uses a regular key.
Thx.
-------------
Steve
Posted By: chev104275
Date Posted: March 28, 2018 at 1:42 PM
Where is the rest of your wiring and bypass ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: tdbaker021
Date Posted: March 29, 2018 at 3:09 PM
|