1998 Chrysler Concorde alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28217
Printed Date: May 14, 2025 at 11:11 PM
Topic: 1998 Chrysler Concorde alarm
Posted By: leon tellis
Subject: 1998 Chrysler Concorde alarm
Date Posted: March 12, 2004 at 12:25 AM
whats is the best way to wire a alarm system in a1998 chrysler concorde. This is actualy my first alarm system instalation HELP. Need a wiring diagram and instructions for instalation.
Replies:
Posted By: Velocity Motors
Date Posted: March 12, 2004 at 12:37 AM
Check the SEARCH function of this forum for this vehicle and also you can look into the wiring diagrams available for this vehicle here: https://www.the12volt.com/info/diagrams.asp------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: leon tellis
Date Posted: March 12, 2004 at 1:08 AM
I am installing a alarm and on the vehicle diagram it says that some of the wires (on location of wires) is BCM. What does this mean?
Posted By: Mad Scientists
Date Posted: March 12, 2004 at 5:35 AM
If it's a Mopar product it would mean Body Control Module.. Listing year, make and model of vehicle, as well as alarm being installed would always be helpful. Regards, Jim
Posted By: leon tellis
Date Posted: March 15, 2004 at 4:51 PM
I am installing a carbine plus 3000 on a 1998 chrysler concorde. Can anyone tell me where the BCM for the power door locks is. I found the color wires that they operate the power door locks behind the drivers side kick panels, is this the right place for installation? Please help.
-------------
Leon Jr. Tellis
Posted By: draasch
Date Posted: March 15, 2004 at 5:23 PM
Make: Chrysler Model: Concorde Year: 1998 This Database Was Last Updated On: 6/9/2003 Index #: 5037 Alarm Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS Ignition 12 volts D BLUE/WHITE IGNITION SWITCH HARNESS Starter YELLOW IGNITION SWITCH HARNESS Dome Light YELLOW (-) AT BODY CONTROL MODULE * Trunk Pin Switch TAN/BLACK (-) BLACK 22 PIN CONN. IN DR. KICK PANEL Parking Lamp BLACK / YELLOW (+) 13 PIN GRAY CONN. AT FUSE BLOCK Power Lock WHITE/ D GREEN 22 PIN CONNECTOR IN #217 Power Unlock SINGLE WIRE SYSTEM DRIVER KICK PANEL ** * Body Control Module Is Located At Junction Block Behind Driver Dash. ** WHITE/ D GREEN Door Lock Wire Must Receive A 12V (+) Pulse Thru A 2.7K Ohm Resistor To Lock And A 12V (+) Pulse Thru A 620 Ohm Resistor To Unlock. #217 - See Single Wire Resistor Door Lock Diagram. ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: leon tellis
Date Posted: March 15, 2004 at 9:43 PM
Thanks for the info.
-------------
Leon Jr. Tellis
Posted By: leon tellis
Date Posted: March 15, 2004 at 9:54 PM
I am intalling a carbine plus 3000 on a 1998 Chrysler Concorde. I am having trouble connecting the wires, please help. I have some info, please help with the rest... ALARM CAR Red (constant) pink/black (ignition harness) Yellow (switched) blue/white (ignition harness) pink (parking lights relay input) ??? RED / White (Parking lights relay output) ??? Violet (Positive door pin trigger input) ??? Green (Negative door pin trigger input) ??? Blue (Negative Aux trigger input ??? 3 Wire power door lock harness ??? ------------- Leon Jr. Tellis
Posted By: draasch
Date Posted: March 15, 2004 at 10:43 PM
ALARM CAR Red (constant) pink/black (ignition harness) Yellow (switched) blue/white (ignition harness) pink (parking lights relay put) i believe this will go to 12 volts RED / White (Parking lights relay output) Parking Lamp BLACK / YELLOW (+) 13 PIN GRAY CONN. AT FUSE BLOCK ??? Violet (Positive door pin trigger input) you will not use Green (Negative door pin trigger input) Dome Light YELLOW (-) AT BODY CONTROL MODULE * Blue (Negative Aux trigger input ??? 3 Wire power door lock harness ??? ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: draasch
Date Posted: March 15, 2004 at 10:56 PM
post a link for the install manual ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: leon tellis
Date Posted: March 15, 2004 at 11:42 PM
Thanks for the help, would you know where the power door lock hooks to (what color wire)
-------------
Leon Jr. Tellis
Posted By: Falcon 1
Date Posted: March 15, 2004 at 11:58 PM
This is a single wire system WHITE/ Lt.green wire. Also require resistors. 620 ohm for unlock 2700 ohm for lock ------------- Do it right the first time, only a doctor can bury his mistakes.
Posted By: leon tellis
Date Posted: March 16, 2004 at 3:27 PM
Thanks for the help.
-------------
Leon Jr. Tellis
Posted By: leon tellis
Date Posted: March 20, 2004 at 11:15 PM
Can a carbine plus 3000 alarm be run directly to the positive wire (under hood) to the actual car horn
-------------
Leon Jr. Tellis
Posted By: leon tellis
Date Posted: March 21, 2004 at 12:53 AM
According to the wiring diagram on a 1998 Chrysler Concorde the horn wire should be on the horn relay switch behind the main fuse box, and it also says that the wire is BLACK/ red There is no BLACK/ red wire behind the horn relay. Does anyone know which wire is the horn wire to be connected to the alarm.
-------------
Leon Jr. Tellis
Posted By: leon tellis
Date Posted: March 21, 2004 at 10:21 AM
Can a car alarm horn wire be ran directly to the car horn instead of the actual siren horn from the alarm? If so can it be ran to the horn wire under the hood by the horn. It's on a 1998 chrysler concorde. It is also a carbine 3000 plus alarm.
-------------
Leon Jr. Tellis
|