Print Page | Close Window

Frequency Filtering?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145146
Printed Date: April 28, 2024 at 1:07 AM


Topic: Frequency Filtering?

Posted By: tshephard
Subject: Frequency Filtering?
Date Posted: January 09, 2019 at 11:53 AM

I tried a few calculators and ended up more confused!

The goal:
Block below 160 and above 6000 from some tiny speakers, on their own leg of an amp, no other speakers on this leg.
They are '4' ohm, in parallel, read 2.5 this way.
The work fine, but I want to protect them from lows and my ears from highs!
I also want the most efficient filter arrangement.

Most sites seem to show a capacitor for the lows, in series with an inductor for the highs, in series with the speaker.

Should any or either component go across the speaker?

THX



-------------
Tim S.



Replies:

Posted By: i am an idiot
Date Posted: January 09, 2019 at 12:13 PM
https://www.the12volt.com/caraudio/cross18db.asp



Posted By: i am an idiot
Date Posted: January 09, 2019 at 12:14 PM
https://www.the12volt.com/caraudio/passive-crossover-calculator.asp

https://www.the12volt.com/caraudio/passive-crossovers.asp


Print Page | Close Window