2000 Jeep Cherokee Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Jeep Cherokee Alarm Information )
| 2000 Jeep Cherokee Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Red |
Ignition Switch Harness |
| Starter |
Yellow |
Ignition Switch Harness |
| Ignition |
Blue |
Ignition Switch Harness |
| Ignition 2 |
Black/Orange |
Ignition Switch Harness |
| Accessory |
Black/White |
Ignition Switch Harness |
| Tach |
Gray |
Coil |
| Neutral Safety Wire |
Yellow (+) |
Ignition Switch |
| Brake Switch |
White/Tan |
Brake Switch |
| Trunk Release |
Pink/Black (+) |
Driver's Kick Panel Rear Body Harness |
| Parking Lights |
Black/Yellow (+) |
Light Switch |
| Head Lamp |
Purple/White (+) |
26 Pin Connector Passenger's Kick Position S3 Junction BL |
| Factory Disarm |
Purple/Yellow |
Driver's Kick Panel |
| Door Trigger |
Yellow (-) |
Under Dash Light or Overhead Module |
| Door Lock |
Orange/Purple (-) |
Driver's Kick Panel |
| Door Unlock |
Pink/Purple (-) |
Must use Relays |
| Driver's Lock |
Orange/Black |
Junction Block |
| Driver's Unlock |
Pink/Black |
Junction Block |
| Horn Wire |
Black/Red (-) |
Steering Column |
| Windows Up |
LF=Light Blue, RF=Brown/White, LR=Blue/White, RR=Gray/Black |
| Windows Down |
LF=White, RF=Purple/White, LR=Red/Black, RR=Green/White |
|
|
Follow the12volt.com
Thursday, May 2, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
