flcan reset, do i need to reflash firmwar

Home / the12volt's Install Bay / Car Security and Convenience / flcan reset, do i need to reflash firmwar (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

soonerfan51

Member - Posts: 5

Joined: September 27, 2014

Location: Oklahoma, United States

Posted: September 28, 2014 at 3:33 PM / IP Logged

I reset my flcan on accident during install. Do I need to have the firmware reflashed, or should it still be good to go?

Thanks.

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: September 28, 2014 at 3:46 PM / IP Logged

Still good to go. After it is flashed with the correct application firmware, you can do a Factory reset with no problem. I always do a Factory Reset and then set the Installation Mode just prior to vehicle programming. The Factory Reset will loose the vehicle specific programming if you had already done that final step.

Soldering is fun!

Back to Top

soonerfan51

Member - Posts: 5

Joined: September 27, 2014

Location: Oklahoma, United States

Posted: September 28, 2014 at 4:13 PM / IP Logged

Okay. Good.. now I get a crank with no start. Also the doors don't lock when I hit the lock on the remote fob.

One thing I am not sure about is the pink wire out of the flcan. I have it hooked up to the pink ignition1 wire on the vehicle harness along with the pink ignition1 from the ca6553. Is this correct?

Appreciate all your help.

Back to Top

soonerfan51

Member - Posts: 5

Joined: September 27, 2014

Location: Oklahoma, United States

Posted: September 28, 2014 at 6:37 PM / IP Logged

Got it all figured out. The folks I purchased the flcan module from flashed it with ads firmware instead of dbi. All is good so far..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

flcan reset, do i need to reflash firmwar

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.