the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Chevrolet Suburban, Steering Wheel Stereo Wiring?


Post ReplyPost New Topic
< Prev Topic Next Topic >
fat42 
Member - Posts: 1
Member spacespace
Joined: April 27, 2006
Location: Australia
Posted: November 26, 2006 at 4:47 PM / IP Logged  

Hi..

Does anyone have the stereo wiring for a Suburban??  I particularly need the wiring colours for the steering wheel controls...

Cheers!!

Pete

Once You've Had Fat, You'll Never Go Back!
i am an idiot 
Platinum - Posts: 13,663
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 26, 2006 at 5:20 PM / IP Logged  

Don't know the wiring for it   but this page may offer some helpful products

http://www.pac-audio.com/products/productsCatagory.asp?mmSearch=Steering%20Wheel%20Interface

master5 
Silver - Posts: 1,123
Silver spacespace
Joined: October 10, 2006
Location: United States
Posted: November 26, 2006 at 5:53 PM / IP Logged  

Here are the basic color codes. For the steering wheel controls the link in the last reply makes the adaptors which come with the color codes for that..if you just need the codes call the companys tech support and they might give it to you if you can't find it elsewhere...good luck

Radio 12v  orange   +   radio harness 

Radio Ground  BLACK/ white   -   radio harness 
Radio Acc.  (Class 2 Serial Data)*       
Radio Illumination  BROWN / white (dimmer)   +   radio harness 
Factory Amp Turn-on  pink   +   radio harness 
Power Antenna  dk. green   +   radio harness  
 
LF Speaker +/-  tan - gray   +,-  radio harness
RF Speaker +/-  lt. green - dk. green   +,-  radio harness 
LR Speaker +/-  brown - yellow   +,-  radio harness 
RR Speaker +/-  dk. blue - lt. blue   +,-  radio harness 

Notes: If equipped, the amplifier is under the center console.

* class 2 serial data...if you are replacing the head unit you need to run your own accy wire but I reccomend the proper interface to retain chime, RAP and other features..you can use the scosche DCGM09 or similar..if you have onstar you need the onstar interface to retain it also available from scosche and others.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, March 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer