the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

01 continental remote start problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
2001eclipse 
Member - Posts: 29
Member spacespace
Joined: July 09, 2007
Location: California, United States
Posted: January 11, 2008 at 4:29 AM / IP Logged  

Installed a 791XV... programmed the tach, and the car starts right up. However several gauge lights stay on (ABS, Check Engine) and also on the message display "Check traction control" I double checked my wires and the only question I have is do ALL of the accessory wires have to be used in order to remote start? I have both ignition wires hooked up currently. I disconnected the battery and reconnected it back then tried starting the car with the key and all was well. No lights in the gauges stayed on. But as soon as I used the transmitter, then the lights came back on again.

Any help will greatly be appreciated. TIA

brhaugen 
Copper - Posts: 275
Copper spacespace
Joined: September 30, 2005
Location: North Dakota, United States
Posted: January 11, 2008 at 6:52 AM / IP Logged  
I have checked Audiovox, Ultrastart and JBS wiring charts:
There is some confusion on what wire is what:
Audiovox an Ultrastart say:
   
Ignition 2 GRAY / YELLOW (+) IGN SWITCH HARNESS   
Accessory 1 BLACK/ LIGHT GREEN (+) IGNITION SWITCH HARNESS   
But JBS says:
IGNITION 2 BLACK/ LIGHT GREEN (+) IGNITION SWITCH HARNESS     
ACCESSORY /HEATER BLOWER 1 GRAY / YELLOW (+)   IGNITION SWITCH HARNESS
Have you tested the wires??
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 11, 2008 at 8:55 AM / IP Logged  

i got

Ignition 1 - BROWN / Pink (+) @ ignition harness

Accessory 1 - Gray / YELLOW (+) @ ignition harness
Accessory 2 - Gray / YELLOW (+) @ ignition harness

yes, both wires are the same colour and both must be used to allow the heater/blower motor to work.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer