the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sub air flow?


Post ReplyPost New Topic
< Prev Topic Next Topic >
daboss593 
Copper - Posts: 154
Copper spacespace
Joined: March 29, 2008
Location: Florida, United States
Posted: April 18, 2008 at 7:25 AM / IP Logged  
ok so the monster box from hell is now done. is set up for 2 x1252w infinities. this is a vented box tuned at 30hrz.. this box is a monster. it does fit and the guy i had make did a very nice job and even sound dead the inside of the box for free. issue is the spec from infinity have the subs pointing up, not towards the back or front. ive seen these boxes before and never had one untill now. problem is there is very little space allowed. from the subs to the trunk poss only around 8 inches.  this make car was one of the none mafia caddy trunks. ive seen other systems with even tighter set ups. i just want some info on what can damage speakers etc? the box could have been modded to have the norm speakers pointing towards the back or front still same issue only 6-8 inches of space. input guys?
OWWWWWWWWWWW you said you discharged the cap!
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: April 18, 2008 at 2:59 PM / IP Logged  
Depends on if the speaker is suitable for up/down firing and its sag %.
Depends on the enclosure and application..sometimes it sounds better upfiring sometimes not.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: April 18, 2008 at 4:38 PM / IP Logged  
6-8 inches is fine.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
daboss593 
Copper - Posts: 154
Copper spacespace
Joined: March 29, 2008
Location: Florida, United States
Posted: April 18, 2008 at 6:43 PM / IP Logged  
the box was built by the companies specs. ive just never had this tight of a fit.
OWWWWWWWWWWW you said you discharged the cap!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer