Programming 514t siren

anyone know how to pick which tones the revenger soft chirp siren uses?  it's the one that come w/ most DEI products...  i found the install manual for the alarm itself on their site but couldn't find anything on the siren..  i know there's 6 tones an you pick which ones you dont'  want it to use and you can clip that loop on it to make the siren louder.  anyways if anyone knows how you go about picking the tones, it'd be greatly appreciated.  i'll hafta try look at the siren some more later.  there must be somethin on it for that...

You can actually pick tones from it? The only way I knew of that you can do that (which is the way I did it), is to open the siren, and clip the solder joints for the ones you don't want. I opened mine up, and out of the 6 joints, I clipped 3 or 4.

ya that's what i was talking about. thanks!  i'll hafta go open it up later an look.

Here is what you do. Take the siren apart and you will see the 5 or six solder points. The tones go from right to left. The first tone will be the one on the right and they will move left. The tones you dont want you cut and thats pretty much it.

ya i found 'em..  i gotta do some soldering b/c when i had it installed i told them to only leave one've them.  i feel like changing the siren though so i'm gonna switch tones.  thanks guys!