2008 mustang shelby gt500

Home / the12volt's Install Bay / Car Security and Convenience / 2008 mustang shelby gt500 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Bales

Member - Posts: 3

Joined: January 21, 2003

Location: United States

Posted: September 15, 2008 at 1:31 PM / IP Logged

I am currently getting all the parts I need to put an alarm and remote start into a 2008 Mustang and I can not find a definitive answer on what immobilizer bypass needs to be used. The only info I can find says to use the XK04 for PATS but it does not say that it works for 2008. Can somebody give me a definitive answer?

Hornshockey

Silver - Posts: 520

Joined: January 31, 2005

Location: Texas, United States

Posted: September 16, 2008 at 10:57 AM / IP Logged

According to their website, http://www.bypasskits.com the XK04 will work for immobilizer bypass on the 08 Mustang.

If you don't have their XKloader or know of a shop that does, you can order the PKF3 that's already preloaded with the correct firmware.

Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 mustang shelby gt500

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.