2003 oldsmobile alero

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 oldsmobile alero (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

creatingmars

Member - Posts: 1

Joined: September 25, 2008

Location: Arizona, United States

Posted: September 25, 2008 at 2:13 PM / IP Logged

Ok, I'm new to posting in this forum but have been a longtime reader of the information, so if this is the incorrect spot to post this, please let me know.

I am having an issue with this car where there is no fuel pressure, pump is not turning on and security light is on but not blinking. So, this gives me the indication that this is the Passlock II system that is causing the issue. There is no voltage going to the fuel pump.

I just bought the DEI 555L and will be installing it later today. My question is: The car currently wont start at all but it cranks, In order to install this do I have to be able to start the car or will installing it fix that issue?

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: September 25, 2008 at 5:16 PM / IP Logged

The vehicle must be in good running order to allow you to program any module.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 oldsmobile alero

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.