the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 accord and compustar p2w9000fmr


Post ReplyPost New Topic
< Prev Topic Next Topic >
kmongru 
Member - Posts: 37
Member spacespace
Joined: August 18, 2003
Location: Canada
Posted: October 31, 2008 at 9:47 PM / IP Logged  

hi, im planning to do an install in an 04 accord 5spd 4cyl and am wondering how hard it is to install the compustar p2w9000fmr? Im planning on using a DEI bypass module, are there any problems that i can potentially run into? anyone have any experience with these cars? also the compustar, how hard is it 2 self install? Ive always used DEI products and have never installed a compustar, and am wondering if theres anything i need 2 worry about? can I do simple programming myself? Any insight is appreciated. Im trying to get as much info as possible. cheers

wblakes 
Copper - Posts: 202
Copper spacespace
Joined: February 03, 2004
Location: United States
Posted: November 01, 2008 at 3:16 PM / IP Logged  
CompuStar is easier to install because you don't have that extra relay pack that DEI have. on your car just be sure to test your wires because there are alot of wires in your kick panel and alot of the colors are the same. other then that, straight forward installation. good luck
revolutionz_s13 
Member - Posts: 19
Member spacespace
Joined: November 18, 2007
Posted: November 01, 2008 at 3:23 PM / IP Logged  

if you dont have the module, use an idatalink module....they are designed for the compustar systems and work very well in conjunction with them.  http://www.idatalink.com

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: November 01, 2008 at 9:25 PM / IP Logged  
Let me know when you get stuck on the clutch bypass....
kmongru 
Member - Posts: 37
Member spacespace
Joined: August 18, 2003
Location: Canada
Posted: November 02, 2008 at 1:33 AM / IP Logged  
lol oh geez i guess i gota research the clutch bypass before i start the job. i did a search and came across some info. also quick question? the accord has factory window roll up, can i easily pulse the lock?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer