viper 5901 won't remote start.

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 won't remote start. (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: February 24, 2009 at 9:02 PM / IP Logged

There should be another troubleshooting there you cycle the key and press the valet button

its in the install manual .

I don't have one handy but i can check at work tomorrow

filmmastermike

Member - Posts: 10

Joined: February 19, 2009

Location: California, United States

Posted: February 24, 2009 at 9:23 PM / IP Logged

I see, Shutdown Diagnostics,

I'll try that, thanks!

Search for other posts by filmmastermike

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: February 25, 2009 at 9:28 AM / IP Logged

ok i just checked, there is no factory immobiliser on this car so you have an issue with the tach or the wiring like i mentioned earlier.

commit your way to jehovah and he will act in your behalf. psalms 37:5

filmmastermike

Member - Posts: 10

Joined: February 19, 2009

Location: California, United States

Posted: February 25, 2009 at 10:52 AM / IP Logged

the shut down diagnostic says that I have "Low or no RPM'

I need to check that tach connection... or should I use virtual tach?

filmmastermike

Member - Posts: 10

Joined: February 19, 2009

Location: California, United States

Posted: February 25, 2009 at 8:54 PM / IP Logged

Ok, I think I found the problem,

I have two Ignition wires

and two starter wires

Ignition 1 is connected

Ignition 2 is connected

Starter 1 is connected

Starter 2 is NOT connected

The Manual says that the Pink/Black and Pink/White can be programed to be Ignition2, 2nd Accessory or 2nd Starter .....

filmmastermike

Member - Posts: 10

Joined: February 19, 2009

Location: California, United States

Posted: February 27, 2009 at 9:18 AM / IP Logged

OK so that is what it was. I need to connect a relay to the second Starter cable.

Thanks for all the help guys! viper 5901 won't remote start. - Page 2 - Last Post -- posted image.

jrod83

Copper - Posts: 81

Joined: October 29, 2007

Location: Texas, United States

Posted: February 27, 2009 at 3:38 PM / IP Logged

also be sure to program your tach....

MECP Certified

I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!

SAW 'EM OFF!

souljah972

Member - Posts: 24

Joined: September 23, 2006

Location: United States

Posted: March 30, 2009 at 12:05 PM / IP Logged

Im having the same problem in my 2008 Honda Accord I have the 5901 as well using the xk07 for lock,

unlock, trunk pop etc i thought it also handled door triggers., and pkh34 immobilizer, it doesnt attempt to start

at all, It Says REMOTE START ERROR when i try. When i arm it, it arms but says door and hood are open,

thats why im figuring the remote start wont work. But everything is closed. Im getting no flashes from

headlights after I attempt to start it. ???

Live For The Music

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 won't remote start.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.