settle bet passive crossover?

Home / the12volt's Install Bay / Car Audio / settle bet passive crossover? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Flatlandfreak

Copper - Posts: 48

Joined: January 04, 2005

Location: United States

Posted: March 11, 2009 at 9:49 AM / IP Logged

Ok, so me and my boss are having a small argument about passive crossovers and I would like to prove my point.

So I have a simple question. When using a non-polorized capacitor as a simple passive crossover (bass blocker if you will) on a standard 4-ohm speaker. Does it make any difference whether the capacitor is placed in series with the positive (+) or negative (-) lead of the speaker?

Please only people who know for certain please answer. I'm looking for the "expert" opinion here.

Thanks! settle bet passive crossover? - Last Post -- posted image.

I Like Peanut Butter!

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: March 11, 2009 at 1:00 PM / IP Logged

It does not matter. Actually on a 2 channel bridgeable amplifier, there is signal on left positive and right negative wires. So the cap on the right positive wire is actually on the ground wire. The signal is on the negative wire. If your boss does not believe this, remove all speaker wires from the amp and using a meter check the resistance between the left negative and the right positive wire. It will be 0 ohms.

Above is assuming that the bridge wires of the amp are the left positive and the right negative.

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: March 11, 2009 at 9:47 PM / IP Logged

As long as your consistant both will work. It won't change the crossover point, but it can affect time alignment and off axis response, this is why it's nomally on the + side (hesitate to say posative because it is an ac signal) or you could go nuts and split the different and put half on each lead.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

settle bet passive crossover?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.