the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

marine audio


Post ReplyPost New Topic
< Prev Topic Next Topic >
marine2 
Member - Posts: 1
Member spacespace
Joined: April 27, 2009
Location: Tennessee, United States
Posted: April 27, 2009 at 9:36 AM / IP Logged  
I have a Kenwood componet system in a boat that operates on 110v ac.  I would like to install a 12v sony stero.  I plan to wire the sony into the 12v system on the boat but would like to run the audio out of the sony and through the Kenwood system amp and equalizer for distribution to all the speakers on the boat.  The sony has an audio output to an amp.  Can I plug the sony output directly into the Kenwood amp without any problems?  Thanks for your help.
TonyB
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: April 27, 2009 at 12:29 PM / IP Logged  
you wont have any problems at all doing that.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer