the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start sutting off when door open


Post ReplyPost New Topic
< Prev Topic Next Topic >
joeeey 
Member - Posts: 17
Member spacespace
Joined: May 31, 2009
Location: New York, United States
Posted: May 31, 2009 at 4:41 PM / IP Logged  
I just installed a Clifford 50.7x in my 2001 Lexus GS300. Everything works fine except if the doors are closed and the remote start is running and I open the door it shuts off the engine. If I leave the door open and start the remote start it runs fine. I have the correct door wire connected to the correct pin of the alarm (green wire - trigger) There must be some feature that needs to be turned off. Can anyone help with this issue. I have been toying with this for 3 hours now and I can't figure out what's causing it. If I probe with my test light from ground to the door wire on the alarm it shuts the engine off on remote start. So I know it is related to the green - door trigger wire. Thanks in advance.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: May 31, 2009 at 7:04 PM / IP Logged  
That's weird. The only thing I could think would be if that unit has some kind of manual transmission mode.
Is a hood pin installed? Is the Clifford's gray hoodpin wire connected to anything?
And even though I can't imagine this happening.....any chance that somehow the car's brake lights are getting activated when you open the door?
joeeey 
Member - Posts: 17
Member spacespace
Joined: May 31, 2009
Location: New York, United States
Posted: May 31, 2009 at 7:31 PM / IP Logged  
I disabled the Manual transmission mode in the programing. I don't have the hood pin connected yet. But I can use the remote start while the door id open, but if I close the door and reopen it it will shut off the remote start and I don't get any unusual reading on the 2 way remote like hood open or brake pressed? I have never seen anything like this before. It sound to me like it's some where in the programing but I don't see anything in the manual.
joeeey 
Member - Posts: 17
Member spacespace
Joined: May 31, 2009
Location: New York, United States
Posted: June 02, 2009 at 6:00 AM / IP Logged  
I found the problem. I thought that I post it just in case anyone else has had this problem. In menu 2 option 14 - Aux 3 linking, if set to Smart Key Control (link to remote start off). It will stop the remote start when a door is open if programed to smart key control. Thanks all.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer