the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

would it be safe?


Post ReplyPost New Topic
< Prev Topic Next Topic >
chevy metal 
Member - Posts: 17
Member spacespace
Joined: June 04, 2009
Location: Michigan, United States
Posted: June 14, 2009 at 2:07 PM / IP Logged  

i'm going to be running two amps, but one needs to go to the shop first and it'll be some time before i can send it in... if i ran 0 ga from the battery to a distribution block in the trunk, and split that to 4 gauge and then ran that to my amp.  and then ran a 4ga as a ground would it be safe?  i know consistency in wire can be a huge no no in some cases, i just don't want to make that mistake now!

also, after i get both amps hooked up, do i have to have a seperate ground for each or should i run them to a distributor block into 0 ga to the same ground?

-THANKS IN ADVANCE

-Chevy Metal

jbaxter6 
Member - Posts: 4
Member spacespace
Joined: June 05, 2009
Location: Wisconsin, United States
Posted: June 14, 2009 at 3:28 PM / IP Logged  
i would run two separate 4g grounds the idea of the dist block is good 4 power but i wouldn't isolate the grounds that way if you have a prob with 1 amp it will short 2 ground seperatly
the master of the relay
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: June 14, 2009 at 4:27 PM / IP Logged  
jbaxter6 wrote:
i would run two separate 4g grounds the idea of the dist block is good 4 power but i wouldn't isolate the grounds that way if you have a prob with 1 amp it will short 2 ground seperatly
what?
its fine if you want to run 0ga and use a D block for power and then ground the amp separately. nothing will happen as long as 4 gauge is big enough for your amp and you keep the same size ground. you dont need to use a D block for the ground but when you install the other amp i would use the same ground point as the first amp.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: June 15, 2009 at 1:00 AM / IP Logged  

soundnsecurity wrote:
its fine if you want to run 0ga and use a D block for power and then ground the amp separately. nothing will happen as long as 4 gauge is big enough for your amp and you keep the same size ground. you dont need to use a D block for the ground but when you install the other amp i would use the same ground point as the first amp.

Agree.  Another choice is to ground the second amp just inches from the first one, thereby drilling a different hole and providing a dedicated screw for tightening.  This prevents "stacking" one ground wire on top of the other, which could lead to loss of continuity.  Two grounds an inch or two away from each other would still be considered "same location", but each has a dedicated ground point.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer