the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

reverse mounting speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
ocboy79 
Member - Posts: 26
Member spacespace
Joined: March 24, 2005
Location: United States
Posted: August 16, 2009 at 6:11 PM / IP Logged  
i have 4 dual 4ohm speakers in a fiberglass box. they all share the the same airspace no dividers. I have the wiring diagram to get a 2 ohm load but i want to invert 2 of them. how do i wire them because i know you have to wire the inverted ones differently then the regular mounted ones. any help would be WONDERFUL thanks!
panasonic-8300
16- pioneer ts-w250r
boston 6x9
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 16, 2009 at 6:31 PM / IP Logged  
You must wire the inverted speakers out of phase with the conventionally mounted ones.  On the inverted ones, treat the negative terminals as positive, and treat the positive terminals as negative.
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
ocboy79 
Member - Posts: 26
Member spacespace
Joined: March 24, 2005
Location: United States
Posted: August 16, 2009 at 6:35 PM / IP Logged  

im doing the series/paralell so all i do is the normal pos. to neg. on the speaker, then treat the pos as neg and neg as pos to the next speaker?

panasonic-8300
16- pioneer ts-w250r
boston 6x9
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 16, 2009 at 6:52 PM / IP Logged  

You say to the next speaker, that is only correct if the next speaker is the one mounted to the front of that speaker.  All speakers mounted to the box in the conventional manner are wired as they are labeled.  If the speaker is inverted, connect the positive wire to the negative terminal of that speaker.  Connect the negative wire to the positive terminal of that speaker.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
ocboy79 
Member - Posts: 26
Member spacespace
Joined: March 24, 2005
Location: United States
Posted: August 16, 2009 at 9:51 PM / IP Logged  
thank you very much! i got it all installed and it jams
panasonic-8300
16- pioneer ts-w250r
boston 6x9

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer