viper 5902 on 03 toyota camry

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 on 03 toyota camry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jason_76

Member - Posts: 2

Joined: November 12, 2009

Location: Michigan, United States

Posted: November 14, 2009 at 6:07 PM / IP Logged

I have a 03 camry and a viper 5902 i was wondering if some one can help me get figure out how i can get my defrost to work with my viper and does any one have an install manuel for the 5902 i need to program it to passive arm and lock please help

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 14, 2009 at 6:24 PM / IP Logged

for the rear defrost you will have to get behind the switch and test for the proper wire and see if it is pulsed or latched, you can use a number of wires from the alarm brain, i would use the WHITE/ violet wire from H2/6 if the wire in the car is a negative trigger

this is how you will get into programming mode, you will want to change menu 1m option 1 to number 3 for passive

1. open a door

2. turn ignition on then off

3. Select a Menu. Press and hold the Control button. The number of siren chirps indicates the menu number.

1 chirp indicates menu 1, 2 chirps - menu 2 and 3 chirps for menu 3.

4. When the desired menu chirps are heard, release the Control button.

5. Select a Feature. Press and release the Control button the number of times corresponding to the featureyou wish to change. Thenpress and hold one more time to select the features.

6. Program the Feature. While holding the Control button, you can program the feature using the remote

control.

jason_76

Member - Posts: 2

Joined: November 12, 2009

Location: Michigan, United States

Posted: November 14, 2009 at 6:35 PM / IP Logged

thank u

does any one know if the 03 camry le has confort closeure or will i have to buy the dei 530t

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: November 14, 2009 at 9:59 PM / IP Logged

Camry has no comfort closure. You'll need window module(s).

Rear defroster, if I remember right, is either yellow/light blue, or light blue / YELLOW or yellow/light green.

It's at the fuse box in a plug just below the fuses, and is low-current negative trigger.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 15, 2009 at 3:33 AM / IP Logged

That point about passive arm and lock. DON'T. Passive arm is a bloody nuisance when you get back to your car having gassed it up and you've left your key in the car. Now think about passive arm and lock and do that at 3:00am and then think how much fun that's going to be. Our old workshop policy was to get the cars in then immediately open the driver's window and take the keys with us. N.B. With a 530t the only way to make it work as per spec., i.e. one shot open/closing from ALL window switches is to go to the motor wires on ALL the window motors.

kopfan

Member - Posts: 1

Joined: November 16, 2009

Location: Singapore

Posted: November 16, 2009 at 12:47 PM / IP Logged

05gt wrote:

this is how you will get into programming mode, you will want to change menu 1m option 1 to number 3 for passive

1. open a door

2. turn ignition on then off

3. Select a Menu. Press and hold the Control button. The number of siren chirps indicates the menu number.

1 chirp indicates menu 1, 2 chirps - menu 2 and 3 chirps for menu 3.

4. When the desired menu chirps are heard, release the Control button.

5. Select a Feature. Press and release the Control button the number of times corresponding to the featureyou wish to change. Thenpress and hold one more time to select the features.

6. Program the Feature. While holding the Control button, you can program the feature using the remote

control.

What is pulsed and what is latched?

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 16, 2009 at 3:40 PM / IP Logged

It's called validity and latched in installer terms!

Validity is a signal that will continue as long as a transmission is recieved

Latched is a signal that will remain on and stay on until de-activated by the remote

Pulsed i'm sure is self explanatory! Pulsed however is only available on the blue/white defroster wire! I think! I'll check it and get back to you for sure!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5902 on 03 toyota camry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.