the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 gmc savana directwire information


Post ReplyPost New Topic
< Prev Topic Next Topic >
budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: November 19, 2009 at 10:05 AM / IP Logged  

I am looking for the directwire information for a 2004 GMC Savana. I am installing this older Viper 560xv Alarm/Start this weekend, I hope.

Any information would be greatly appreciated. Thank you

budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: November 27, 2009 at 12:18 AM / IP Logged  
Any wiring information on this would help me. Thanks
budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: November 28, 2009 at 11:24 AM / IP Logged  

I found some info on a 2005 GMC Savana, is it the same?  The door trigger is confusing. I have a driver door,passenger door,driver and passenger side split walk thru doors and the 2 rear doors. How would all these be hooked up

Thanks

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 28, 2009 at 12:47 PM / IP Logged  
The 04 & 05 are the same. The door triggers have to be diode isolated so that they do not backfedd into each other. Have the cathode band facing the alarm on each trigger.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 28, 2009 at 1:07 PM / IP Logged  
Alarm Info
2004 gmc savana directwire information - Last Post -- posted image.BatteryRED / BLACK(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Ignition 1PINK(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Starter 1YELLOW(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Domelight SuperGRAY/BLACK OR DK.BLUE/WHITE(+)BLACK PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.LF LatchTAN(-)PIN B4 IN LT.BLUE PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.RF LatchLT.GREEN(-)PIN A5 AT BCM LT.BLUE PLUG
2004 gmc savana directwire information - Last Post -- posted image.LR LatchYELLOW/BLACK(-)PIN A10 IN LT.BLUE PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.RR LatchYELLOW/BLACK(-)PIN A10 IN LT.BLUE PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.Trunk TriggerCOMMON WITH DOORS
2004 gmc savana directwire information - Last Post -- posted image.Parking LightsBROWN(+)FUSEBOX UNDER DRIVERS SEAT
2004 gmc savana directwire information - Last Post -- posted image.Low Crr Pk LightsBROWN / WHITE(-)BROWN PLUG AT BCM
  
Remote Start Info
2004 gmc savana directwire information - Last Post -- posted image.BatteryRED / BLACK(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Ignition 1PINK(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Ignition 2WHITE(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Accessory 1ORANGE(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Accessory 2BROWN(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Starter 1YELLOW(+)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.Anti-Theft TypePASSLOCK II
2004 gmc savana directwire information - Last Post -- posted image.Anti-Theft DescriptRESISTOR BASED SYSTEM
2004 gmc savana directwire information - Last Post -- posted image.Key SenseLT.GREEN(-)IGNITION SWITCH HARNESS
2004 gmc savana directwire information - Last Post -- posted image.TachometerWHITE OR VIOLET(AC)PIN 25 GREEN PLUG PCM2004 gmc savana directwire information - Last Post -- posted image.
2004 gmc savana directwire information - Last Post -- posted image.Speed SenseDK.GREEN(AC)GREEN PLUG AT PCM
2004 gmc savana directwire information - Last Post -- posted image.Parking LightsBROWN(+)FUSEBOX UNDER DRIVERS SEAT
2004 gmc savana directwire information - Last Post -- posted image.Low Crr. Pk LightsBROWN / WHITE(-)BROWN PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.Brake LightsWHITE(+)BRAKE SWITCH
2004 gmc savana directwire information - Last Post -- posted image.Reverse LightsLT.GREEN(+)BLACK PLUG AT BCM
2004 gmc savana directwire information - Last Post -- posted image.HornTAN(-)GRAY PLUG AT BCM
budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: November 28, 2009 at 7:00 PM / IP Logged  

Velocity Motors wrote:
The 04 & 05 are the same. The door triggers have to be diode isolated so that they do not backfedd into each other. Have the cathode band facing the alarm on each trigger.

Should this be done at each door switch (RF,LF,RR,LR, and the doors in the very back)? So I need 5 diodes, right? What size diodes do I need?

Or, am I putting the diodes on the wires coming from the alarm to the BCM? Which would be 3 or 4 diodes? One for RF, one for LF, one for RR & LR becuase they both share the same wire, right? What about the rear doors in the very back, do they get their own diode or are they sharing with the RR and LR wire also?

I am trying to locate a lighting diagram to see if the far back doors share the same wire or not?

Also, I have two bypasses on hand, a DEI 555L and a Directed Electronics GMBP bypass kit. Which one would be the best one to use?

Thanks again for your help.

budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: December 15, 2009 at 11:50 AM / IP Logged  

The Viper560xv is installed, but I have a few questions if someone can help. I ended up using the Directed Electronics GMBP bypass kit.Domelight supervision isn't working.

1. With the diode isolation, isn't  the band facing the alarm for positive door triggers?  My van is negative door triggers,so should the bands be towards the trigger?

2. The domelight supervision wire is a  BLACK/ white negitive 200mA on this Viper560xv. According to the hookup wire chart above I use the gray/black at the BCm black plug pin E. The chart says this is a positive pin. Do these wires get connected or do they need a relay? If so, how is the relay connected.What would happen if they were connected?  Would it burn the whole module or just that domelight circuit?

3.Can or is it possible for me to program the fob to remote start with the lock and unlock buttons instead of pushing the start button twice? My other Vipers I use those two bottons and would like this one to be the same. Right now it's set to timer start, which makes it a pain because I am used to pressing them on my other alarms.

Thanks in advance

budbandit 
Member - Posts: 6
Member spacespace
Joined: September 09, 2004
Posted: December 19, 2009 at 10:04 AM / IP Logged  

Any ideas on these questions? I am stumped on these and don't want to mess anything up. Thanks

boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: December 24, 2009 at 2:03 AM / IP Logged  

I don't know anything about DEI stuff so someone else will have to help you with that. Question number 2 the dome light supervision thing, you will need to use a relay. I could tell you how but, it would be easier to show you the link right here at the 12  volt. Let us know how it goes

https://www.the12volt.com/relays/page1.asp#n2p


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer