09 jetta, idatalink ads ca

Home / the12volt's Install Bay / Car Security and Convenience / 09 jetta, idatalink ads ca (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 20, 2009 at 6:20 PM / IP Logged

I will be putting in a nustart 4502 and the ads multi can module

as far as getting the windows to go up and down with the remote, if I wire the lock and unlock W2W instead of data and I take aux 1 output and wire it to lock and set it for the desired amount of time will this put my windows UP and Down, because the remote has a single button for arm/lock and disarm/unlock or will I need aux 1 and aux 2 to get this done

if anyone has any info so I can get this done that would be great

Mike

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 22, 2009 at 7:49 PM / IP Logged

Yes, this will work. Set the AUX 1 and AUX 2 for 8-10 seconds and you should be able to control the windows witht he extended pulses. Just make sure that you turn off secure auxilary so you can just press the button once instead of having to press two buttons.... just easier for the end user.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 22, 2009 at 8:41 PM / IP Logged

just to verify Jeff

I will need both aux's to do this? if I want to wire up rear defrost what output could I use from the brain?

Mike

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 23, 2009 at 4:04 PM / IP Logged

The extended pulse on the Idatalink will not work for the window controls. The protocol for the windows is different than the door locks and will require a direct connection from the AUX 1 and AUX 2 to the door wires at the module inside the door. As far as the defrost, you can change one of the POC wires to option # 17 for Defrost and this wire will control the defrost option for you.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 23, 2009 at 6:35 PM / IP Logged

yah I also talked to tech support at idatalink and they said it wouldn't work, I would need to go into the door to do this

however they also said they will be updating the firmware so the modules will control windows and sunroof, but not till the spring time

thanks for the info on the rear defrost, I will be using the blade AL to get this done

Mike

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

09 jetta, idatalink ads ca

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.