881xp ignition input wire location?

Home / the12volt's Install Bay / Car Security and Convenience / 881xp ignition input wire location? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

bruno molly

Member - Posts: 20

Joined: November 11, 2009

Location: North Carolina, United States

Posted: January 12, 2010 at 5:45 PM / IP Logged

I listed the remote number RPN7701 V/P/X, the same LCD remote thats pictured in the manual. I was told that was the one to get. I do have the ground wire to Neg, and the 4 wire antenna connected. I don't have the harness that has the yellow wire for IGN but I have that terminal connected to a switched 12v toggle on my workbench to simulate IGn +. The only thing I don't have hooked up are like a trunk or hood pin trigger, remote start satellite relays, shock, motion, perimeter sensors, glass break...none of that as I didn't think any of that is needed to just be able to program the brain to the remote. Is there anything else i need to connect to program the brain? Does this brain, the 881XP only work with the LCD remote?

The Sky is not the limit....The Ground is!

bruno molly

Member - Posts: 20

Joined: November 11, 2009

Location: North Carolina, United States

Posted: January 12, 2010 at 6:09 PM / IP Logged

This is the Exact system I have:

881XP

I am missing some items however. Does anyone on here have a 7 pin harnesses (remote start harness in the middle of the photo with the yellow wires) that you don't need just laying around? any Spare DEI components wires etc. you might want to get rid of?

The Sky is not the limit....The Ground is!

zerepdivad

Silver - Posts: 605

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: January 12, 2010 at 6:33 PM / IP Logged

You should probably just buy a new unit. The monkeys at car lots and dealerships just randomly cut and rip stuff out.

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 12, 2010 at 7:22 PM / IP Logged

X2 with Zep!

commit your way to jehovah and he will act in your behalf. psalms 37:5

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 13, 2010 at 5:06 PM / IP Logged

lets hope the units you have are not shorted out, while they jsut yanked the crap out of it.

the 7pin harness is the ribbon cable that connects to the XCRS relay pack. If you dont have it then the brain wont get power. you wont have ign, acc, start, startkill outputs either.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

881xp ignition input wire location?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.