Buying a Multimeter

Home / the12volt's Install Bay / Car Security and Convenience / Buying a Multimeter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mr_Kite

Copper - Posts: 70

Joined: April 08, 2003

Location: United States

Posted: April 14, 2003 at 12:31 AM / IP Logged

I’m new to installing alarms, so I could use some advice on buying a multimeter.

I have read past posts concerning multimeters, and have seen suggestions for Fluke more than anything (>$100). A few suggested DMMs from "lesser known" brands ($35-60).

I plan on installing a 2-way alarm system and amp/subs over then summer so I certainly don’t want a POS just to save a few bucks. On the other hand I don’t want to spend over $100 on a high end unit just to have all the extra functions not used because I’m just an amateur installer.

Is brand name important in a DMM? Also someone told me for automotive use (particularly audio) to get a DMM that can handle 20 Amps, though I haven’t seen any other than 10 Amps.

So basically id like to know what you think a good Multimeter for an amateur installer/mechanic on a tight budget is! : )

Thanks!

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: April 14, 2003 at 12:43 PM / IP Logged

Yea, I wouldn't really go crazy on a multimeter. I don't install that often, so I got a basic one from Radio Shack. It has the basic functions, beeps when there's continuity, has a good range for my use, and even a nice case:-) This isn't the one I got, but it's very similar in price and function. Considering I only use it like once every month or two, it's perfect. No need for the bells and whistles of one that costs $100+ (for me at least).

Radio Shack's multimeter

Mr_Kite

Copper - Posts: 70

Joined: April 08, 2003

Location: United States

Posted: April 14, 2003 at 4:31 PM / IP Logged

Cool, but how about the 10 amp vs 20 amp?

I was told to use a multimeter with 20 amp capacity when testing audio components/connections.

Is this true?

go2pac

Copper - Posts: 179

Joined: May 04, 2002

Location: California, United States

Posted: April 14, 2003 at 5:13 PM / IP Logged

10 amps is the average for most meters. If you need to measure more than that, then use a clamp on current tester.

Karl

Pacific Accessory Corporation

Mobile Audio Interfacing Equipment

Connecting You to Your Music Since 1976

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Buying a Multimeter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.