Clifford rs2

Home / the12volt's Install Bay / Car Security and Convenience / Clifford rs2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

1200mk

Member - Posts: 16

Joined: March 19, 2003

Posted: April 16, 2003 at 2:55 PM / IP Logged

Hi, I just got hooked up with this alarm for like 100 bucks new. I was wondering how much a shop will charge for it to go into a 2003 crv? And will it cost extra for dome light supervision, and remote door (the car already has power locks)

Thanks.

ViperATC5

Copper - Posts: 202

Joined: January 17, 2003

Posted: April 16, 2003 at 8:29 PM / IP Logged

given that the RS2 is an alarm and remote start unit, heres a breakdown of what you're looking at to install this unit

General Labor $120-180

555U Bypass Module $40

Extra Relays (2) $20

Mercury Switch $15

Misc Wire, Loom & Materials $20

Total - $215-$265

Some shops charge extra to install extras such as power hatch release. Also, you will need a key that you will lose in the install, unless the shop carries 555H bypass modules

1200mk

Member - Posts: 16

Joined: March 19, 2003

Posted: April 16, 2003 at 11:23 PM / IP Logged

What is the extra key for? and is there any way to avoid it? thanks

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: April 17, 2003 at 2:31 PM / IP Logged

The 555u you have to have an extra key for, because of the transponder chip. The 555h doesn't need the extra key.

Tacomacrew

1200mk

Member - Posts: 16

Joined: March 19, 2003

Posted: April 17, 2003 at 2:39 PM / IP Logged

so why would everyone use the 555u if the 555h is available? Those keys are expensive for copies. And you guys know any cheap places to get the 555h? thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford rs2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.