the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

python 991 for 2000 honda passport


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 12, 2010 at 2:07 AM / IP Logged  
Find the OEM hood switch if there, it will work better than anything you can fit.
Neutral safety switch wire goes to parking brake.
If you join trunk trigger to doors, you will need to diode separate, also you won't get any warnings as to whether you've left a door or the trunk open.
Believe me when I say this is a disaster waiting to happen, seek professional help.
Some of these factors appear beyond your understanding and we can't show you through the whole installation.
sape33 
Member - Posts: 31
Member spacespace
Joined: August 17, 2010
Location: Minnesota, United States
Posted: September 15, 2010 at 7:14 PM / IP Logged  
Ok Thanks for your worries about my work I apreciate that.
I understand everything you said.
I almost finish intalling my system. ts all working now. I just need to make a hole in the firewall to conect the siren (I can only hear horn now) and run a wire Amp too. Everything is working fine. Remote start, door locks. I haven't install any extra sensors yet. I'm going to move the temperature sensor, to be more acurate.
I had to program with a bitwritter because it was set up for manual transmition. I'm been taking pictures because I'm going to post it in another website and link it from here in case anybody wants to see it.
Now Im going to start to solder and put everything back together.
sape33 
Member - Posts: 31
Member spacespace
Joined: August 17, 2010
Location: Minnesota, United States
Posted: October 03, 2010 at 7:20 PM / IP Logged  
Ok. I,v been working too much overtime. Not time to finish this job yet. I still can't find the oem alarm dissarm wire. In this web site it says its an yellow/blue wire in a white connector. I try them all no results. Python keeps seting off the oem alarm. thanks.
sape33 
Member - Posts: 31
Member spacespace
Joined: August 17, 2010
Location: Minnesota, United States
Posted: October 03, 2010 at 7:24 PM / IP Logged  
I have something in mind. How can I make some LED amber light bar add to my alarm. arm, dissarm and setting off plus also to work when I push the emergency light on.
The bar has no control. just cigarret ligther plug. Thanks
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer